How to Make a DIY Elevated Cat Feeding Station for Your Cat

How to make a DIY elevated cat feeding station for your cat? I did a lot of research to find out the simplest possible way to do it.

If you enjoy crafting and providing your beloved feline companions with custom-made creations, a DIY elevated cat feeding station is the perfect addition to your repertoire.

This new and helpful device for feeding cats improves your cat’s mealtime and gives your home a stylish look.

This simple guide will show you how to make a DIY elevated cat feeding station for your cat?

Materials Needed

How to make a DIY elevated cat feeding station for your cat

  • A piece of wood large enough to accommodate the diameter of the cat bowls
  • Hole saw with an attachment matching the bowl diameter (or a jigsaw as an alternative)
  • Two bowls with lips on the top to sit securely in the holes
  • Legs (cut from scrap wood or suitable materials)
  • Stain and finish (Minwax Wood Finish in Espresso and Minwax Polyurethane in
  • Semi-Gloss recommended)
  • Liquid Nails Heavy Duty Construction Adhesive (or alternative glue)
  • Assorted sandpaper (150 and 220 grit)
  • Mask, eye protection, and appropriate safety gear for working with wood and finishes
nan TOTAL SCORE

Raised Cat Food Water Bowl Elevated Tilted Kitty Dishes Set

View On Amazon
Raised Cat Food Water Bowl Elevated Tilted Kitty Dishes Set

nan TOTAL SCORE

Navaris Cat Bowls with Stand - Elevated Triple Feeder for Cats

View On Amazon
Navaris Cat Bowls with Stand - Elevated Triple Feeder for Cats

nan TOTAL SCORE

JAZUIHA Elevated Cat Food Bowls,Raised Tilted Cat Bowl Stand

View On Amazon
JAZUIHA Elevated Cat Food Bowls,Raised Tilted Cat Bowl Stand

nan TOTAL SCORE

Ceramic Elevated Cat Bowls, Raised Puppy Dishes for Food and Water

View On Amazon
Ceramic Elevated Cat Bowls, Raised Puppy Dishes for Food and Water

nan TOTAL SCORE

Petsoigné Basic Cat Bowls with Wooden Stand Pet Dining Table Cat Feeder

View On Amazon
Petsoigné Basic Cat Bowls with Wooden Stand Pet Dining Table Cat Feeder

Step By Step How To Make A DIY Elevated Cat Feeding Station For Your Cat

Let’s make a DIY elevated cat feeding station for your cat with just 6 easy steps below!

Step 1: Prepare the Wood

How to make a DIY elevated cat feeding station for your cat

Start by cutting the main piece of wood to the desired dimensions. An oak piece from a wood scrap pile can work well, but softer woods like pine may be easier. A size of approximately 16″ x 5.5″ should suffice for a two-bowl feeder.

nan TOTAL SCORE

Premium Baltic Birch Plywood,3 mm 1/8"x 12"x 18" Thin Wood 6 Flat Sheets

View On Amazon
Premium Baltic Birch Plywood,3 mm 1/8"x 12"x 18" Thin Wood 6 Flat Sheets

Step 2: Drill the Bowl Holes

How to make a DIY elevated cat feeding station for your cat

Measure and mark the locations for the bowl holes on the wood. Using a clamp for stability, carefully use a hole saw with the appropriate diameter to create two holes for the cat bowls.

Ensure the bowls fit snugly into the holes, thanks to their lips preventing them from falling through.

nan TOTAL SCORE

Petsoigné 2Pcs Replaceable Bowls for Raised Cat Bowls Elevated Pet Bowls

View On Amazon
Petsoigné 2Pcs Replaceable Bowls for Raised Cat Bowls Elevated Pet Bowls

Step 3: Craft the Feeder Legs

Cut two suitable pieces from the scrap wood created during the previous step for the legs. Consider your cat’s preferences for dining height, and keep the legs relatively short.

For example, if your cat prefers a height of 2 inches, ensure the legs are appropriate.

Step 4: Sand and Stain the Pieces

Use 150-grit sandpaper to smoothen the main piece and the legs, rounding the edges and buffing away any rough spots. Follow up with 220-grit sandpaper to polish the entire surface.

Afterward, apply the wood stain (Minwax Wood Finish in Espresso) to give the feeder an elegant appearance. Use a sealant like polyurethane or polyacrylic to protect the wood and make cleaning easier.

Step 5: Assemble the Feeder

How to make a DIY elevated cat feeding station for your cat (5)

Position the legs on the main piece and secure them using Liquid Nails Heavy Duty Construction Adhesive (or an alternative adhesive of your choice). PApply sufficient force or secure the pieces with clamps until the glue becomes dry.

When the primary layer of polyurethane is dry, put on another layer. Sometime recently, you put on another layer and softly rub the surface with sandpaper to form it smooth.

How to make a DIY elevated cat feeding station for your cat

Conclusion

You can make an awesome homemade cat feeding area by following these easy directions. It will show off your creativity and be a valuable and good-looking addition to where your cat eats.

Treat your feline friends to their custom-made feeder and watch them enjoy their meals in style!

I hope that this article is valuable for you! It is easy to do.

Thank you for following me in “How to make a DIY elevated cat feeding station for your cat?” and my Pet Car With Sam!

Read Also:

What Are The Cat Nutrition Needs And How To Meet Them?

What Should Cats Eat? What Are The Top 8 Healthiest Cat Foods?

Visited 1 times, 1 visit(s) today

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!